When it is time to change the oil in Your transmission on Your Ford Transit Connect there are a few things that You will need to do. First You will want to make sure that You get ATF-TYPE MV or Dexron ViAutomatic transmission fluid for Your vehicle since they will provide the best protection. First You will need to get under Your van and then You can locate the transmission and the drain plug on the side of it. Unscrew the drain plug and allow it to drain into an oil catcher or bucket. After that replace the plug with a fresh washer and bolt and make sure it is sealed. Next fill from the engine compartment with fresh transmission fluid. Be sure to check the transmission dipstick. Once it is full You will need to start the vehicle and run through the gears. After that make sure to check the level and top off if needed.
Dale N.
April 10, 2020
On the ford transit connect gearbox oil change you can put it into fourth gear, there is two plugs one in front of the box and one underneath to the rear. It would be best if the car was lifted. Then you can fill it up with 75w90 gearbox until it overflows and stops, then you refit the filling plug.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.